INTRODUCTION:

Hydraulic cocoa butter press machine are precision design and manufacturing, high quality and patented technology.Use the highest quality durable steel materials, that are wear and distortion resistant.Low operational cost.Extremely durable, low maintenance reliable equipment.Residual fat content as low as 10% can be achieved

APPLICATION:
Cocoa Butter,Almond Oil,Walnut Oil,Pine Nuts Oil,Macadamia Oil,Sesame Oil,Moringa Oil,Flaxseeds Oil,Hazelnut Oil and etc.

CAPACITY:

30/50/70/90/120KG/Batch

MACHINE MATERIAL:

Oil Pan With SUS 304.Main Body Use Q235 External Plating

Manufacturer Directly Sale.Guarantee Most Competitive in China Market.Welcome inquiry!

Cocoa Butter Press Machine Introduction:

Cocoa liquor itself consists of two (2) components; cocoa butter and cocoa powder. In a cocoa press the ‘solids’ (what will be cocoa powder) and the ‘liquids’ (cocoa butter) are separated by pushing the liquor up against a cloth bag in a closed chamber – the cloth bag is designed to let the butter pass through but to keep the ‘solids’ inside the chamber. Separating the butter from the solids requires an large amount force (generated hydraulically). Because there is so much force put on the product, the ‘solids’ come out as hard as a brick, which is referred to as ‘cake’ and is later crushing and fine milling into cocoa powder.

The main benefit of hydraulic pressing is that it creates no sheer forces on the product and allows for exact control of the volume of cocoa butter pressed out ensuring optimum product quality. After a few minutes sufficient butter is pressed out (typically to about 10 – 12% rest fat in the cake, sometimes to 20 – 24%), the press opens and the cakes take out to the below cocoa cake crushing machine below. Before being transported to the cocoa powder fine milling machine the cakes are first crushing into smaller pieces called ‘kibble’.

Advantage of Our Hydraulic Cocoa Butter Press Machine:

1.Precision design and manufacturing, high quality and patented technology.

2.Use of only the highest quality durable materials, that are wear and distortion resistant.Low operational cost.Extremely durable, low maintenance reliable equipment.

3.Cocoa Powder residual fat content as low as 10% can be achieved.Satisfy the low-fat cocoa powder standard.

Cocoa Butter Press Machine Core Parts:

1). Main Body:
It consists of bottom-board, column, pressing chamber assembly, drip tray, nuts, etc. The main body is one of the main parts of the machine, in which the crops in the chamber are pushed upward by the force from the cylinder, through the drip tray, oil flow down from lines to collector.
2). Hydraulic Transmission
This is the main power source to create the high yielding rate, which consists of the transmission shaft, worm wheel, worm, gear pumps, high-pressure pump, relief valve, manual valve, cylinder assembly, pipe joints, and other parts. This machine adopts the most advanced hydraulic pump stations in the world, comparing with the national 2-class piston pump. The advantage is a low speed, higher pressure, and resist high temperatures. Besides, it can keep working above 65 degrees without the cooling device.
3). Electrical control
This is the advanced core of the machine, which consists of a motor, voltmeter, temperature reconciliation sheet, pressure gauge, control fuse, and other units.

Cocoa Butter Press Machine Also Application For:

Almond Oil,Walnut Oil,Pine Nuts Oil,Macadamia Oil,Sesame Oil,Moringa Oil,Flaxseeds Oil,Hazelnut Oil and etc.

ADVANTAGE:

1.Reasonable design, Simple structure
2.Strong durability, High efficiency
3.Energy saving & Easy to use & less maintenance

TECHNICAL PARAMETERS:
MODEL YY-180 YY-230 YY- 260 YY- 280 YY-320
Working Pressure 60 MPa 60 MPa 60 MPa 60 MPa 60 MPa
Barrel Diameter 180MM 230MM 260MM 280MM 320MM
Main Power 1.1kw 1.5kw 1.5kw 2.2kw 4.0kw
One-Time Press Capacity 3-4kg 7-8kg 9-10kg 13-15kg 19-20kg
Average Capacity 15-35kg/h 35-55kg/h 55-80kg/h 80-120kg/h 120-150kg/h
Piston Work Distance 300MM 400MM 430MM 500MM 500MM
Weight 550kg 880kg 1050kg 1450kg 1650kg
Dimension (mm) 850*750*1200 900*800*1550 950*900*1620 1000*1100*1650 1100*1150*1660
Cocoa Butter Press Machine Working Video:
FAQ

Q1: What is machine material?
A1: Q235 Steel For Main Body

Q2: How long need for this machine working per batch?
A2:Regular working time per cycle are 7-8min ,add cocoa liquor feeding time and cocoa cake discharge time ,average per cycle need 10 minutes.

Q3: What is the voltage of the machine?
A9: The equipment with standard voltage 380V 50HZ 3Phase.If different with your city ,we can modify for you.

Q10: How long will take from order confirmed to delivery?
A10: Regular 15 Days

MACHINE PRODUCTION WORKSHOP

EVERLINK MACHINERY FACTORY
PIctures of EVERLINK MACHINERY FACTORY
EVERLINK MACHINERY DELIVERY PICTURES

MACHINE DELIVERY PICTURES

Please Fill In Below Contact Information and Specific Demand If You Interest Our Machine

1 + 1 = ?